Especificaciones técnicas:
- altura de centrado: 110 mm
- guía 20 mm

Hand pump for calibrating and checking the operations of
the diesel injectors
- precise adjustment of the injection pressure (adjust the
opening pressure of the injection nozzle)
- control of the spray atomization (pattern and vibration
characteristics)
- control tightness (leaks)
- equipped with bypass valve for the manometer.
Dial: 0 - 600 bars gliceroil
Tank fitted with a filter
Supplied with 2 connection pipes: 14-14 and 14-12 mm

17 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive

Guided socket wrench for dismounting the internal ring-nut of the CR Siemens injector on Ford and Peugeot.

Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors.
List of contents:
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 0.01 mm (5 pcs each thickness)

Wrench to fix/remove the flange, shaft and pulley on the following pumps ZEXEL VP. The timing pin is included.

Flange for fixing ZEXEL VP pumps on test benches. It requires the universal bracket 9680-A)

N10 wrench socket for the valve retaining screw on Bosch CRIN 3 injectors, 1/2" drive.
Similar to 0 986 613 632

20 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive. Similar to Bosch 0 986 613 458.

27 mm hexagon socket wrench 1/2" drive for the solenoid retaining nut of Industrial Denso and Siemens Injectors

New injector tester adapter diam.26 for Iveco Tector (petented pipe)

8225-CP3 helps to determine if the ZME valve can be retained, instead of installing a new one, on CP3 and CP1-H pumps.
Similar to 0 986 613 270

New version of the b racket 9562-S. This revised design is suitable for the PFM1P100 pumps and the 0 141 401 106 as well.

Pair of universal flat bracket to install both P and H pumps, simply by placing or removing the thickness of adaptation

Splined coupling to drive CP3.4 (MAN) pumps on any test bench.
Similar to 1 685 702 092

Flexible pipe ( cr 2500BAR) to connect the high pressure delivery from the pump outlet to the rail. Nuts 14x15 / 14x1,5. Similar to 1 680 712 324

This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.