Skip to Content

ECOMMERCE


EUR (ecommerce)
Sort By: Featured
16 mm 8 points (Octagonal) socket wrench for the nozzle nuts of common rail injectors. 27 mm hexagon drive. Similar to Bosch 0 986 610 383.
Comparator support
Holder for millesimal gauge with 70 mm diameter round top. Made in hardened, ground and lapped steel.
Anti-backlash coupling
ISO 4008/1 anti-backlash coupling diam.115 - M14 holes
Flexible pipe
Flexible High pressure line L=600 mm. - M12x1,5 - M12x1,5
Flexible pipe
Flexible High pressure line L=600 mm. - M12x1,5 - M14x1,5
Tappet holder for Bosch CP2 pumps. Similar to 0 986 612 858 Zexel 157931-9400
Transfer pressure Kit
Kit to determine if the ZME valve can be retained, instead of installing a new one, on CP4 pumps.
Splined coupling to drive CP3.4 (MAN) pumps on any test bench.Similar to 1 685 702 092
Splined coupling to drive CP3.4 (MAN) pumps on any test bench.
Similar to 1 685 702 092
Splined half coupling for CAV pumps
Bussola 1/2 per Torx Femmina E8
Cacciavite per Torx Femmina E8
Bussola 1/2 per Torx 50
Torx bit
Similar to 0 986 613 145
Disassembly key
15 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive
Flexible pipe
Flexible pipe ( cr 2500BAR) to connect the high pressure delivery from the pump outlet to the rail. Nuts 14x15 / 14x1,5. Similar to 1 680 712 324
Estrattore per CP1
Extraction tool for the cap on the rod-type filter on common rail high-pressure pump CP1H with gear pump.
Similar to 0 986 613 165
Puller
Extractor tool for the filter cap on CP1H common rail high pressure pumps equipped with gear pump.
Similar to Bosch 0 986 613 162.
Set fissaggio e trascinamento pompe CP2 (cono 30 + flangia fissaggio + flangia lubrificazione)
Lube
Additional external LUBE.
*** Required if the test bench in use is not equipped with a lubricating system.
Centralina di lubrificazione per pompe CP2
Centralina di lubrificazione per pompe HP0