Skip to Content

ECOMMERCE


EUR (ecommerce)
Sort By: Featured
Connecting interface to drive the stroke rod of the Zexel PFR..2K pumps, on 9562-M1 cambox.
Connecting interface to drive the stroke rod of the Zexel PFR..3K pumps, on 9562-M1 cambox.
Connecting interface to drive the stroke rod of the Denso and Zexel MD/KD pumps, on 9562-M1 cambox.
Connecting interface to drive the stroke rod of the camshaftless pumps, on 9562-M1 cambox.
Bracket
Plate for BOSCH 1 cyl.pump with location clamp for determining the delivery start ratio, with rod guide
Universal basic cambox
Cambox universal base to house camshaftless pumps up to 4 cylinders on the test bench.
The cambox must be configured correctly (mounting plate, thickness - if required -, camshaft, control lever connection, sliding rod), depending on the type of pump to be tested.
Chiave a bussola dentata_
Insert external diameter 6,3 mm.with inside hole diam.2,8 mm.on Stanadyne pumps.
Bit for the governor control cover screw on DP2100 pumps. Similar to 7244-438.
Comparator holder to measure the travel on the governor magnet. Similar to 0 986 612 657
Inseritore paraolio albero comando pompa DPC
Oil seal inserter for pump drive shaft
Supporto comparatore brevettato
Assembly gauge for testing the position of the rack travel sensor short circuiting ring on M pumps with electronic regulator. Similar to Bosch 0 986 612 590, KDEP 1909.
Dial gauge holder.
Comparator bearing to survey the rod stroke for A-B-BV pumps
Puller
Sliding hammer with adapter to extract Bosch CRIN injectors on Iveco Eurocargo
Checking gauge
Checking gauge for the protrusion level of 25 and 35 mm camshaft cones
Similar to Bosch reference 0 986 611 278, KDEP 2924.
Surveying gauge
Surveying gauge for cam shaft protusion level diam.17 and diam.20
Similar to Bosch reference 0 986 611 139, KDEP 2899
Comparator bearing
Comparator bearing to survey the rod share with connections for BOSCH P, P7100,8500,MW BOSCH pumps
Single reamer for the shaft bushing of the VE pump (nominal diameter 20 mm). Similar to 0 986 611 958
Single reamer for the shaft bushing of the VE pump (nominal diameter 17 mm). Similar to 0 986 611 951
Pre-stroke measuring device, to adjust the delivery start and measure the tappet clearance on the TDC, in the PE (S) .. P, with M24 x 1.5 connection. Similar to BH 1688130085 - 1688130112 -1 688 040 071