Skip to Content

ECOMMERCE


EUR (ecommerce)
Сортировать по: Рекомендуемые
Socket spanner with slot for the pressure control valve. Similar to 0 986 611 757, KDEP 1086.
Turbo testing instrument
This tester checkes the maximum pressure BAR on LDA and on the exhaust manifold -it also checkes the exhaust gas temperature. This checking must be done on the motor vehicle
Comparator supports box
Universal comparator supports box for delivery start on test bench and check for BOSCH P injection pumps setting on the engine
Disassembly wrench
Disassembly wrench for two teeth
membrane and screwdriver ( KDEP 1542 - BH 0 986 612 049 )
Adjusting wrench
Diesel oil adjusting wrench hexagon plus screwdriver
Oil adjusting wrench 10mm
Diesel oil adjusting wrench hexagon plus screwdriver
Chiave registro nafta due denti più cacciavite
High pressure test pipes for test bench (unbent), covered by rubber
Specifications:
- external diameter: 6 mm
- internal diameter: 1,5 mm
- thickness: 2,25 mm
- length: 710 mm
- nuts: M12x1,5 mm - M14x1,5 mm
Similar to Hartridge AHP134
Torque converter puller Simms on Ford Transit extended 26x1,5 - 14 threads
Go-not-go gauge for Sigma CMS pumping feet 26x1,5
Иглы для очистки дизельных форсунок
Set of 9 pentagonal reamers to remove dirt and oxide from diesel nozzle holes.
3 pieces by 3 different dimensions: 0.05 // 0.07 // 0.10 mm
Регулировочный ключ (длинный)
Governing wrench for squirt feed pressure 14x1,5 - 3/32"
Wrench for mass-holder
Wrench for mass-holder nut size A/B/BV with pressure guide for auto-centering RQV… B…A governor
Tool for delivery start dimension
Tool equipped with capillary hole-drilled glass to take the delivery start dimension. With exhaust valve, it enables to clearly see the overflow. Thread 12x1,5-14x1,5
Puller coupling for motoring hub
Puller coupling for motoring hub for P 7100/7800 BH pumps on Mercedes 19.44, Iveco 190.48 and Mack engines.
Thread puller M52x1.5, tooth 16 mm
Governor wrench
RQV...B... регулировочный ключ.
Аналогично Bosch 0 986 611 395 (KDEP 2969).
Teeth wrench
Teeth wrench for oversize rod rack for P BH pumps
Governor springs wrench
Two teeth wrench to adjust the governor springs
9785 Chiave dinamometr. Williams per bussole serrag. 3÷13 Kgm
Dynamometrical wrench 30-140 NM, 20-100 LBFFT
30 mm decimal dial gauge for the rack rod travel. Similar to 1 687 233 015
Spline socket ½" drive for the pressure valve holders. Similar to 0 986 611 451, KDEP 2986.