Skip to Content

ECOMMERCE


  1. Products
  2. Hand Tools
  3. Tools for Injectors (3....)
  4. 320 Tools for Crdi injectors
  5. Tools for Bosch CRI (321)

Tools for Bosch CRI (321)

EUR (ecommerce)
Sort By: Featured

Tools for Bosch CRI (321)

Ball lift relief tool
High accuracy electronic tool to test and trig the electromagnetic actuator of Bosch CRI and CRIN injectors and automatically relief the ball lift for the 3rd stage repair.
Disassembly key
Disassembly key 14 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive
17.5 mm 8-Point (Octagonal) socket wrench for the nozzle nuts of common rail injectors. 27 mm hexagon drive. Similar to Bosch 0 986 610 477.
Hexagonal open insert for torque wrench
27 mm hexagonal open wrench, 14 x 18 mm connection.
Micron measuring station
Micron measuring station with digital reading. 0-25 mm range.
RIDUZIONE PER ESTRATTORE A COLPO
Comparator support
Holder for millesimal gauge with 70 mm diameter round top. Made in hardened, ground and lapped steel.
Alesatore guidato con fresa conica (ns. cod. 8044), per sedi iniettori common rail su 16 valvole Fiat. Fornito in cassetta di legno.
Filtro magnetico
INSERITORE FUNGHETTO INIETTORI COMMON-RAIL
Inserter
Sliding inserter for ring and seal of common rail injectors
Allen wrench
Allen wrench, 10 mm hexagon drive to dismount the high-pressure sealing ring of common-rail injectors - 7,5 mm hole
9700-CR Cassetta lappatura iniettori common rail
Toolset for the manual grinding and lapping of the ball seat on Bosch CRI and CRIN valves.
Compact pneumatic press for CRI and CRIN ball valves
Tool to recover the tightness of the ball valve of CRI and CRIN common rail injectors.
It is not a grinding operation to remove hardened metal from the conical seat: the principal is to keep the treatment of the conical surface and compact its molecoles by a strong shot on a geometrically accurate sphere made of hard metal.
A set of 10 pcs of these balls is provided with the machine.
Each ball can be used for 100 shots and have not to be confused with the balls normally used as spare part.
Allen wrench
Allen wrench, 10 mm hexagon drive to dismount the high-pressure sealing ring of common-rail injectors - 6,5 mm hole
ALESATORE GUIDATO CON 3 FRESE
Motoring reamer consisting of three milling cutters: plane milling cutter for nozzle holders seats Mercedes; coned milling cutter for nozzle holders Fiat Daily Ducato and plane milling cutter with large guide for Ford Transit nozzle holders seats.
Patented
Green compound for lapping - 50 gr. Similar to Bosch 5 837 010 105.
320 grit paste for polishing and lapping diesel nozzles
Polishing and emery paste - grain 320
600 grit paste for polishing and lapping diesel nozzles
Polishing and emery paste - grain 600
400 grit paste for polishing and lapping diesel nozzles
Polishing and emery paste - grain 400