Test Equipment

Cable for Denso common rail injectors, 4 poles on Toyota

Adapters kit for VTR110 on pump VP29/30 and VP44

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of EDC-V5 pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.

Adapter cable for Zexel Covec-F pumps application on MAZDA engines

Adapter cable for Zexel Covec-F pumps application on HYUNDAI (MITSUBISHI) engines ( L200 4D56 engines)

Adapter cable for Zexel Covec-F pumps application on ISUZU 4JG2 engines

Kit for the electric test in static conditions of the rpm sensor on VP pumps with OTA

Adapter plate for DENSO ECD V3/V4/V5 pumps for the advance reader

Steel Test Piping (ØE 6 ≠1,85 l=450mm) M12x1,5/14x1,5 common rail application. Covered with rubber for pumps VR

Steel Test Piping (ØE 6 ≠1,85 l=600mm) M14x1,5/14x1,5 common rail application. Covered with rubber

Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VE pumps with inductive and resistive actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

The kit includes:
- programming smartcard that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. length)
- adapter cable 81.02.434 (similar to Bosch 0986612434). Additional cables are available, under request
- Illustrated step-by-step instructions manual
- Test data to calibrate the pumps that can be connected to the adapter cable 81.02.434

Training for the use of the ERT45R simulator with the programming kit for testing the Bosch CP1/CP3/CP4 common rail pumps.

Service features:
- The training course will take place in Italy at the DETEQ site
- Duration of 1 day
- Maximum for 2 participants
- It is taught in English
- Standard training is intended for participants who are already operators of diesel systems.
- Technical instructions on the technology of the components that are the object of the operation of the machine are excluded. This type of service can only be provided with DETEQ.
- At the end of the training a certificate of attendance will be issued

The course includes training provided by DETEQ technicians, for:
- Performance characteristics of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. Participants will first be instructed and followed by our technical staff for practical exercises.

Cable for Bosch common-rail injectors with electromagnetic actuator applied on Mercedes vehicles and also for common rail injectors with piezoelectric actuators.

Unlock the full potential of the Simulator ERT45R for testing Bosch VP44 and VR30 diesel fuel injection pumps on any test bench with this comprehensive kit. It includes all the components you need for seamless operation:
- Programming card to activate the necessary functions of the ERT45R control unit.
- Basic cable (2-meter length) for ample movement and flexibility when connecting to the pump.
- Adapter cables to interface the basic cable with various connectors, ensuring compatibility with multiple customizations of diesel injection pumps.
- The servicing manual features step-by-step illustrated instructions for easy setup and operation.
- Registration form to access the test plan for Bosch VP44/VR30 pump calibration. Test data is provided separately, free of charge, upon acceptance of the license agreement.

>>Important Requirements<<
- The ERT45R control unit (part number 81.01.080B) is essential to operate the software functionalities. This programmable control unit supports operations on over 20 different types of diesel injection pumps, further enhancing the system's versatility.
- The special cradle (part number 81.01.1A01) is mandatory for proper functionality. It can also be utilized with other types of diesel injection pumps, making it a versatile tool.
- The kit (part number 81.01.1A14) configures the special cradle exclusively for Bosch VP44 and VR30 pumps, ensuring precise compatibility.

*** To maximize the program kit’s features and capabilities, ensure all necessary components are part of your setup. ***

Cable adapter for Zexel Covec-F pumps application on NISSAN TD27, CD20 engines

The kit includes the mounting adapters for the following pumps: Bosch VE, Zexel VE, Delphi DPC, DPC, DP200, DPS.

The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. Length)
- adapter cables 81.04.002 (Fiat), 81.04.003 (Ford), 81.04.004 (Volvo), 81.04.005 (Clio-Kangoo 1st generation), 81.04.006 (Clio-Kangoo 2nd generation).
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of Delphi DPCN pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.