Skip to Content

ECOMMERCE


  1. Ürünler
  2. Hand Tools
  3. Tools for diesel pumps (2.)
  4. 222 DPA, DPc, DPS, DP200 Epic pumps

222 DPA, DPc, DPS, DP200 Epic pumps

EUR (ecommerce)
Sıralama: Öne Çıkan

222 DPA, DPc, DPS, DP200 Epic pumps

DPA dişlisi için tahrik kaplini
CAV DPA pompalarını (dişi yivli şaftla donatılmış) 17 mm'lik bir konik mafsal aracılığıyla çalıştırmak için adaptör arabirimi. Kamalı erkek arayüz, konik erkek.
CAV-DPC Tool box
Tool box for assembly, disassembly and timing of CAV DPC pumps (17 particulars).
Interface for 9664-N
Interface (adapter with rod) for 9664-N on Delphi DPS pumps
Interface for 9664-N
Interface (adapter with rod) for 9664-N on Delphi DP200 pumps
Splined half coupling for CAV pumps
COMPLESSIVO MANOMETRICO CAV
0-16 BAR manometer for feeding pressure pump
Torque adaptor, drive plate screws
Torque adaptor, drive plate screws
Reduction
Reduction for electronic degrees tester DP200-1-2-3 pumps
Plug for timing check on DP200 pumps. Similar to CAV 7244-631.
Inserter for the shaft seal
Inserter for the shaft seal, on the CAV/Lucas/Delphi DP210 pumps.
Similar to CAV/Lucas/Delphi 7244-633.
Adjustment tool
Adjustment tool for the maximum fuel on Delphi DP200 pumps.
Similar to Cav Lucas Delphi Hartridge 6404-80A
Reduction plate
Reduction plate for mounting the disk to the cone shaft 17 and 20 with rigging ( CAV 7244-578 )
Socket wrench for the cam ring screw on DPA, DPS, DP200 pumps Similar to CAV 7244-125B.
Nylon oil seal inserter diam. 20 mm (Ref. V 706 / V 612/B)
Drainage container with removable tray
It creates 12 compartments of various sizes to house the components of the rotary pumps during assembly and disassembly operations.
Thanks to the perforated bottom, the fuel residues inside the pump are collected in the lower tray which can be easily released.

Overall dimensions: approx. 30x40x15 cm
Reductions for degrees tester, 9 pieces
Nove riduzioni per prova gradi, 9 pezzi.
Coupling
3 holes coupling for CAV DPS pumps, direct injection
Timing disk bubble
Quadrant degree ring assembly
Adjusting wrench
Spanner for the turbo control on DPS, DP200 pumps. ( réf. 7244-584)
Measurement device for the advance piston travel on Delphi DPS pumps. Similar to CAV 7244-447.