Denso ECD-V5

تعد وحدة التحكم ERT45R جوهر نظام الاختبار العالمي المصمم لمضخات حقن الديزل التي يتم التحكم فيها إلكترونيًا، والمتوافقة مع أي منصة اختبار. لقد تم تطوير هذا المحاكي المبتكر من خلال أبحاث مكثفة، مما أدى إلى جهاز متعدد الاستخدامات قابل للبرمجة عبر البطاقات الذكية (بطاقات الرقائق الدقيقة). تتوافق هذه الميزة تمامًا مع متطلبات التشغيل الحديثة.
يعد ERT45R استثمارًا طويل الأجل، مما يسمح بالتوسع بسهولة من خلال مجموعة مختارة من مجموعات البرمجة المتاحة — 21 خيارًا متاحًا حاليًا. تشتمل كل مجموعة على بطاقة برمجة (برنامج)، ودليل تعليمات مفصل مع رسوم توضيحية خطوة بخطوة، وكابلات أساسية (طولها 2 متر)، وكابلات محول مصممة خصيصًا لموصلات مضخة محددة. من خلال الإعداد المباشر، تكون مجموعة برمجة واحدة على الأقل ضرورية للوظائف، مما يجعل ERT45R أداة أساسية للمحترفين الذين يسعون إلى تعزيز قدرات الاختبار الخاصة بهم مع ضمان المرونة والكفاءة في بيئة عملهم.

The following components are provided:
- Centering bracket: mounting flange Ø 50mm
- Coupling system: hub Ø20mm with pulley (pump side)
- fittings for transfer pressure measurement

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of EDC-V5 pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.

Adapter plate for DENSO ECD V3/V4/V5 pumps for the advance reader

The kit includes the mounting adapters for the following pumps: Bosch VE, Zexel VE, Delphi DPC, DPC, DP200, DPS.

Training service for the use of the ERT45R Simulator with the kits for the test of DENSO ECD-V3/V4 & DENSO ECD-V5 pumps..

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

This device is necessary to make any test bench compatible for the essential requirements of controlling the digitally controlled pumps (Bosch VP44-VR30, Delphi DP210 and Epic, Denso ECD-V3/V4/V5).
Furthermore, the special coupling system (bench side) is provided in order that once the adjustiment of the pump timing is done, no rotation is necessary for the removal of the pump from the test bench.
The bracket is suitable to be installed on any test bench having center of the rotation axel at 125 mm from the base. In other cases, specific spacers are available.

The device has a double function: not only to measure the fuel temperature at the outlet of the pump, but also it incorporates a lever valve by which it is possible to exclude the control valve on the pump and speed up the fuel cooling.