Skip ke Konten

ECOMMERCE


The ERT45R system

ERT45R programming kit to test the rotary Denso ECD-V5 pumps.
The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of EDC-V5 pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.
Adapter cable for Zexel Covec-F pumps
Adapter cable for Zexel Covec-F pumps application on MAZDA engines
Adapter cable for Zexel Covec-F pumps
Adapter cable for Zexel Covec-F pumps application on HYUNDAI (MITSUBISHI) engines ( L200 4D56 engines)
Adapter cable for Zexel Covec-F
Adapter cable for Zexel Covec-F pumps application on ISUZU 4JG2 engines
Steel Test Piping (ØE 6 ≠1,85 l=450mm) M12x1,5/14x1,5 common rail application. Covered with rubber for pumps VR
Pipe covered by rubber
Steel Test Piping (ØE 6 ≠1,85 l=600mm) M14x1,5/14x1,5 common rail application. Covered with rubber
Training service
Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VE pumps with inductive and resistive actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.
Kit Pemrograman untuk Simulator ERT45R: Tes Pompa Diesel Rotary Bosch VE-EDC Generasi Pertama (Regulator Resistif).
The kit includes:
- programming smartcard that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. length)
- adapter cable 81.02.434 (similar to Bosch 0986612434). Additional cables are available, under request
- Illustrated step-by-step instructions manual
- Test data to calibrate the pumps that can be connected to the adapter cable 81.02.434
Cable adapter for Zexel Covec-F pumps
Cable adapter for Zexel Covec-F pumps application on NISSAN TD27, CD20 engines
AS25 electronic sensor to measure the travel of the timing-device piston on diesel pumps.
The kit includes the mounting adapters for the following pumps: Bosch VE, Zexel VE, Delphi DPC, DPC, DP200, DPS.
ERT45R programming kit to test the rotary Delphi DPCN pumps.
The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. Length)
- adapter cables 81.04.002 (Fiat), 81.04.003 (Ford), 81.04.004 (Volvo), 81.04.005 (Clio-Kangoo 1st generation), 81.04.006 (Clio-Kangoo 2nd generation).
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of Delphi DPCN pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.
ERT45R programming kit to test Zexel Covec-F1/F2 rotary pumps.
The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables 81.06.231 (Nissan TD27, CD20), 81.06.234 (Isuzu 4JG2), 81.06.235 (Hyundai-Mitsubishi, 81.06.236 (MAZDA) are included
- servicing manual with step-by-step illustrated instructions
- test data to calibrate some of the pumps which can be plugged to the adapter cables 81.06.231, 81.06.234, 81.06.235
Kit di prova delle pompe rotative Zexel Covec-T
ERT45R programming kit for Zexel Covec-T pumps.
The kit includes:
- microchip card to program the simulator and actuate the necessary functions to test this type of pumps
- basic cable (2 mt. Lenght)
- adapter cable 81.04.803
- illustrated step-by-step instructions manual
- test data to calibrate the pumps which can be plugged to the adapter cable 81.04.803
Kit pemrograman untuk mengaktifkan Simulator ERT45R dalam menguji pompa injeksi bahan bakar diesel Bosch H, M, P, R tipe in-line.
Maksimalkan kemampuan Simulator ERT45R untuk menguji pompa injeksi bahan bakar diesel tipe in-line P, H, M, dan R di berbagai bangku uji dengan kit serbaguna dan lengkap ini. Dirancang untuk memastikan operasi yang lancar, kit ini mencakup semua komponen penting untuk pengujian yang efisien dan presisi:

Fitur Utama dan Komponen:
Kartu Pemrograman
Mengaktifkan fungsi-fungsi penting dari unit kontrol ERT45R, memungkinkan kemampuan pengujian lanjutan.

Kabel Dasar (Panjang 2 Meter)
Memberikan fleksibilitas dan jangkauan yang cukup, memastikan kemudahan pergerakan saat menyambungkan simulator ke pompa.

Kabel Adaptor (81.03.104)
Kompatibel dengan konektor yang biasa digunakan pada aplikasi IVECO, VOLVO, dan SCANIA (mirip dengan Bosch 0 986 610 104), memastikan kompatibilitas dengan berbagai implementasi.

Manual Servis Lengkap
Dilengkapi dengan petunjuk bergambar langkah demi langkah untuk pengaturan dan pengoperasian yang mudah, meminimalkan waktu berhenti dan meningkatkan efisiensi.

Formulir Pendaftaran
Memberikan akses ke rencana pengujian spesifik untuk pompa injeksi diesel yang dapat dihubungkan dengan kabel adaptor yang disediakan. Data uji tersedia secara terpisah dan gratis setelah persetujuan perjanjian lisensi.

Persyaratan Penting:
Untuk mengoptimalkan potensi penuh kit ini, komponen berikut sangat diperlukan untuk pengoperasian yang optimal:

Unit Kontrol ERT45R (Nomor Bagian 81.01.080B):
Unit kontrol yang dapat diprogram ini adalah komponen vital, mendukung operasi pada lebih dari 20 jenis pompa injeksi bahan bakar diesel yang berbeda, meningkatkan fleksibilitas sistem di berbagai skenario pengujian.
Kabel Adaptor Tambahan:
Berbagai kabel adaptor tambahan tersedia untuk memastikan kompatibilitas dengan berbagai penyesuaian pompa injeksi diesel lainnya, memperluas adaptabilitas kit untuk memenuhi beragam kebutuhan operasional.
Maksimalkan Kinerja
Untuk hasil terbaik, pastikan semua komponen yang diperlukan sudah termasuk dalam pengaturan Anda. Hal ini memastikan kit pemrograman beroperasi pada kapasitas maksimum, memberikan kinerja unggul dan fleksibilitas dalam aplikasi pengujian.

Pilih kit Simulator ERT45R untuk meningkatkan kemampuan pengujian Anda dan memastikan kinerja yang andal di berbagai aplikasi pompa injeksi bahan bakar diesel.
Kit Pemrograman ERT45R untuk Pompa Diesel Bosch VE-HDK Generasi Kedua (Regulator Induktif).
Kit to program ERT45R Simulator, to test Bosch VE-HDK pumps (2nd generation technology, with inductive actuator).

The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. length)
- Illustrated step-by-step instructions and servicing manual
- Adapter cable 81.02.430 (Similar to Bosch 0986612430). Additional cables are available, under request
- Test data to calibrate the pumps that can be connected to the adapter cable 81.02.430
Adapter cable
Adapter cable for Zexel Covec F application on HYUNDAI 104700-9071
Cavo adattatore pompe BH VE (Rif. BH 0 986 612 441 - KDEP 1865/12) - PSA
Adapter cable for BH pumps VE..R 520 (PSA -Mercedes 250) - 0 986 612 441, fitted with test data
Training service
Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL Covec F1/F2 pumps with electric actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.
Corso di formazione per l'utilizzo del simulatore ERT45R e del kit per la prova delle pompe Delphi DPCN.
Training service for the use of the ERT45R Simulator with the kits for the test of DELPHI DPCN pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.