Test Equipment

Kit for testing rotary Denso ECD-V3/V4 pumps.The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of EDC-V3/V4 pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of EDC-V5 pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.

Adapter cable for Zexel Covec-F pumps application on MAZDA engines

Adapter cable for Zexel Covec-F pumps application on HYUNDAI (MITSUBISHI) engines ( L200 4D56 engines)

Adapter cable for Zexel Covec-F pumps application on ISUZU 4JG2 engines

Steel Test Piping (ØE 6 ≠1,85 l=450mm) M12x1,5/14x1,5 common rail application. Covered with rubber for pumps VR

Steel Test Piping (ØE 6 ≠1,85 l=600mm) M14x1,5/14x1,5 common rail application. Covered with rubber

Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VE pumps with inductive and resistive actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

The kit includes:
- programming smartcard that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. length)
- adapter cable 81.02.434 (similar to Bosch 0986612434). Additional cables are available, under request
- Illustrated step-by-step instructions manual
- Test data to calibrate the pumps that can be connected to the adapter cable 81.02.434

Cable for Bosch common-rail injectors with electromagnetic actuator applied on Mercedes vehicles and also for common rail injectors with piezoelectric actuators.

Cable adapter for Zexel Covec-F pumps application on NISSAN TD27, CD20 engines

The kit includes the mounting adapters for the following pumps: Bosch VE, Zexel VE, Delphi DPC, DPC, DP200, DPS.

The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. Length)
- adapter cables 81.04.002 (Fiat), 81.04.003 (Ford), 81.04.004 (Volvo), 81.04.005 (Clio-Kangoo 1st generation), 81.04.006 (Clio-Kangoo 2nd generation).
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of Delphi DPCN pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables 81.06.231 (Nissan TD27, CD20), 81.06.234 (Isuzu 4JG2), 81.06.235 (Hyundai-Mitsubishi, 81.06.236 (MAZDA) are included
- servicing manual with step-by-step illustrated instructions
- test data to calibrate some of the pumps which can be plugged to the adapter cables 81.06.231, 81.06.234, 81.06.235

ERT45R programming kit for Zexel Covec-T pumps.
The kit includes:
- microchip card to program the simulator and actuate the necessary functions to test this type of pumps
- basic cable (2 mt. Lenght)
- adapter cable 81.04.803
- illustrated step-by-step instructions manual
- test data to calibrate the pumps which can be plugged to the adapter cable 81.04.803

P, H, M, R 형 인라인 디젤 연료 분사 펌프를 테스트하기 위해 ERT45R 시뮬레이터의 기능을 극대화하세요. 다양한 테스트 벤치에서 사용할 수 있는 다재다능하고 포괄적인 이 키트를 통해 원활한 작동을 보장합니다. 키트에는 효율적이고 정밀한 테스트를 위한 모든 필수 구성 요소가 포함되어 있습니다:

주요 특징 및 구성 요소:
프로그래밍 카드
ERT45R 제어 장치의 필수 기능을 활성화하여 고급 테스트 기능을 제공합니다.

기본 케이블 (2미터 길이)
유연성과 충분한 길이를 제공하여 시뮬레이터와 펌프를 연결할 때 이동이 용이합니다.

어댑터 케이블 (81.03.104)
IVECO, VOLVO, SCANIA 애플리케이션에서 일반적으로 사용되는 커넥터와 호환됨 (Bosch 0 986 610 104와 유사)으로 다양한 구현과의 호환성을 보장합니다.

포괄적인 서비스 매뉴얼
구성 및 사용을 간단하게 할 수 있도록 단계별 삽화가 포함되어 있으며, 다운타임을 줄이고 효율성을 극대화합니다.

등록 양식
제공된 어댑터 케이블에 연결되는 디젤 분사 펌프를 위한 특정 테스트 계획에 대한 액세스를 제공합니다. 라이선스 계약 수락 후 별도로 테스트 데이터를 무료로 제공합니다.

중요 요구사항
키트의 모든 잠재력을 최대한 활용하려면 다음 구성 요소가 최적의 작동을 위해 필수적입니다:

ERT45R 제어 장치 (부품 번호 81.01.080B):
이 프로그램 가능 제어 장치는 중요한 구성 요소로, 20가지 이상의 디젤 연료 분사 펌프 유형을 지원하여 시스템의 다재다능성을 더욱 향상시킵니다.
추가 어댑터 케이블:
다양한 맞춤형 디젤 연료 분사 펌프와의 호환성을 보장하기 위해 다양한 추가 어댑터 케이블이 제공되며, 다양한 작업 요구에 맞춰 키트의 적응성을 확장합니다.
성능 극대화
최상의 결과를 얻으려면 요구되는 모든 구성 요소가 설정에 포함되었는지 확인하십시오. 이를 통해 프로그래밍 키트가 최대 성능으로 작동하며 테스트 애플리케이션에서 탁월한 성능과 유연성을 제공합니다.

ERT45R 시뮬레이터 키트를 선택하여 테스트 역량을 향상시키고 광범위한 디젤 연료 분사 펌프 애플리케이션에서 신뢰할 수 있는 성능을 보장하십시오.

Kit to program ERT45R Simulator, to test Bosch VE-HDK pumps (2nd generation technology, with inductive actuator).

The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. length)
- Illustrated step-by-step instructions and servicing manual
- Adapter cable 81.02.430 (Similar to Bosch 0986612430). Additional cables are available, under request
- Test data to calibrate the pumps that can be connected to the adapter cable 81.02.430

TP03 is a digital manometer equipped with memory, to display the peak pressure as well as the effective pressure.
Furthermore, TP03 calculates the leakage time, that is the necessary time to pass from an higer level of pressure to a lower one (both limits are programmable).
For these features TP03 is the most appropriate electronic instrument to be used in conjunction with an injector tester, to automatically relief the Nozzle Onpening Pressure (NOP) of the conventional diesel fuel injectors, as well as NOP1 NOP2 of the 2-stage (double spring) injectors.
By a T connection (M14x1,5), the pressure sensor is insterted into the hydraulic circuit (on the pop tester, between the outlet from the pump and the injector). TP03 is an add-on to any hand operated injector tester and doesn't enahce the hydraulic performances of the injector tester.
When connected directly on vehicle, the TP03 can also be used to test the pressure and detect leakages in Common-rail systems.
24 months warranty.

Adapter cable for Zexel Covec F application on HYUNDAI 104700-9071

Adapter cable for BH pumps VE..R 520 (PSA -Mercedes 250) - 0 986 612 441, fitted with test data