Test Equipment

ERT45R Kontrol Ünitesi, elektronik olarak kontrol edilen dizel enjeksiyon pompaları için tasarlanmış, her türlü test tezgahıyla uyumlu, evrensel bir test sisteminin çekirdeğidir. Bu yenilikçi simülatör, kapsamlı araştırmalarla geliştirilerek akıllı kartlar (mikroçip kartları) aracılığıyla programlanabilen çok yönlü bir cihaz ortaya çıkarılmıştır. Bu özellik, modern operasyonel gereksinimlerle mükemmel bir şekilde uyumludur.
ERT45R, mevcut programlama kitleri arasından seçim yaparak kolayca genişletilebilen uzun vadeli bir yatırımdır; şu anda 21 seçenek mevcuttur. Her kit, bir programlama kartı (yazılım), adım adım çizimler içeren ayrıntılı bir kullanım kılavuzu, taban kabloları (2 metre uzunluğunda) ve belirli pompa konnektörleri için özel olarak tasarlanmış adaptör kabloları içerir. Basit bir kurulumla, işlevsellik için en az bir programlama kiti gereklidir ve bu da ERT45R'yi çalışma ortamlarında esneklik ve verimlilik sağlarken test yeteneklerini geliştirmek isteyen profesyoneller için olmazsa olmaz bir araç haline getirir.

The test bench DIT31 is a modular solution to test the common rail injectors (the additional TC38 triggering unit is required) as well as the conventional and 2 stage (double spring) diesel injectors.
The applied technology allows the test parameters to be determined reliably on each injection, with greater precision and resolution than using on average long test cycles to collect a measurable quantity of fuel.

Main features:
- Main tank 3 lt. with 15 micron filter
- Separated container for the collection of the contaminated liquid
- Large atomization chamber with smoke extraction and halogen lamp
- Pneumatic operated pump unit, the standard version is suitable up to 1400 BAR (compressed air 8-10 BAR is required). Special versions can be installed as optional to generate more pressure and flow.
- Pneumatic vice for the automatic clamping of the injector
- Digital manometer with the reading scale selection (BAR/PSI)
- Printer to generate the test report
- Program for conventional injectors: (1) measurement of the NOP (nozzle opening pressure) and calculation of the back-leakage time.
- Program for Double-spring injectors: (2) measurement of the NOP1 (1st stage) and NOP2 (2nd stage), calculation of the back-leakage time and determination of the K factor.
- 2 programs for common rail injectors: (3) identification of the return flow (leakage time), (4) of the opening delay, the injection time and the injected fuel quantity (dp).
- 24 months warranty. User's and servicing manual in English language.

Adapter cable for Ford pumps BH VE (BH ref. 0 986 612 446)

Adapter cable for Bosch rotary pumps VE..L 585, VE..R 635 (Fiat, Alfa, Lancia, Chrysler), VE..L 715, VE..L 736 (Nissan) (BH ref. 0 986 612 442), fitted with test data

Adapter cable for BH pumps VE..L460, VE..L460-1, VE..L460-2, VE..R530, VE..R530-1 (Audi) - 0 986 612 440, fitted with test data

Adapter cable for BH pumps VE..R 510, VE..R510-1, VE..R 590, VE..R 600, VE..R 638, VE..R 640, VE..R 650, VE..L550, VE..L 650, VE..L 649 (Audi - Volkswagen - Volvo) - 0 986 612 439, fitted with test data

Similar to Bosch reference 0 986 612 430 - KDEP 1865/1.

The ERT45R Programming Kit enhances the functionality of the ERT45R control unit, specifically for testing Caterpillar C6.6 and C4.4 common rail pumps.
By leveraging the available features, Diesel Fuel Injection Specialists are equipped to conduct a comprehensive range of tests with confidence, achieving both precision and reliability in evaluating the performance of this type of pumps.
The specialized software together with the cables are crucial for professionals aiming to deliver high-quality service in fuel injection system diagnostics, thereby improving overall operational efficiency.

Set of tools for the installation of the test bench for industrial pumps: C/rail DENSO HP0 NE SENSOR flanged pump (094000-0342) and BOSCH C/rail CP2 pumps.
Universal Test Bench crandle
Sensor holder
Coupling with reference notch cone 30
Universal mounting flange complete with O-ring

Items included:
- Backflow by-pass set for CP2/HP0 pumps(**)
- Test pipes with propers adapters fittings for CP2/HP0 pumps
- External flowmeter for common-rail Hevy-Duty pumps

(**) This item is strictly required as the feeding capacity of the test bench's pump is not enough to ensure the correct feeding of low pressure (440 liters / hour)

Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL VRZ pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered

This service is a comprehensive opportunity aimed at enhancing the technical skills of diesel injection Specialists.
This one-day course, spanning 8 working hours, will be conducted in English at the DETEQ headquarters in Italy, accommodating a maximum of 2 participants.
Throughout the course, participants will engage with experienced DETEQ technicians who will cover essential topics including the performance features of the products, installation challenges, proper usage methods, and maintenance practices. The hands-on practicality of this training is crucial; participants will receive step-by-step guidance from our technical personnel during practical exercises. At the end of the session, each attendee will be awarded a certificate, confirming their successful participation and knowledge gained during the training. This initiative not only improves operational competency but also empowers technicians to maximize the efficiency and reliability of their diesel diagnostic systems.

Sensor for the test bench shaft for application Caterpillar C6.6

The mounting flange and drive coupling have been meticulously designed to support external lubrication effectively, Furthermore, the coupling is equipped with a reference, significantly simplifying the timing process of the pump once testing concludes. This specialized approach not only enhances the reliability of performances and accuracy of diagnostics but also underscores the commitment to excellence toward the fuel injection system performance.

Zexel VRZ kit for testing the pressure and flow of valve out and valve head

Training service for the use of the ERT45R Simulator with the kits for the test of Common rail BOSCH CP2 pumps .This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Set of hydraulic connections for DENSO HP0 pumps. Items included:
Holder adapter for overflow valve and pipe connections for transfer pressure without manometer.
Cap for PCV valve
High pressure pipes for DENSO HP0 application
Set of pipes of connections for DENSO HP0 application

Set of hydraulic connections for BOSCH CP2 pumps. Items included:
Holder adapter for overflow valve and pipe connections for transfer pressure without manometer.
Cable for camshaft pulse control of pumps BOSCH CP2
Test injector ref. 1 688 901 105
High pressure pipes for BOSCH CP2 application
Set of pipes of connections for BOSCH CP2 application

ERT45R test yönteminin temel bir bileşeni olan FL400/A akış ölçer, yüksek basınç rayına ve dönüş akışına giden akış hızını alternatif olarak izlemek için çift ölçüm yeteneğine sahiptir.

Adapter cable for Zexel Covec F pumps application on Hyundai H100 ( 407980-2670) - 15 poles