The following components are provided:
- Centering bracket: mounting flange Ø 50mm
- Coupling system: hub Ø20mm with pulley (pump side)
- fittings for transfer pressure measurement

Cable for Denso common rail injectors 2 poles

Kit for testing rotary Denso ECD-V3/V4 pumps.The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of EDC-V3/V4 pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.

Add-on device to be applied to DIT31 test bench, to maintain the pressure in the injector's body before and during the test of Common rail Bosch injectors with piezoelectric actuator.

Extension CRP (common rail piezoelectric injectors) for TC38.
- It allows to maintain unchanged the test procedure, extending the application field to the most recent injectors provided of piezoelectric actuator (at present Siemens and Bosch).
- Besides the basic programming card, for piezoelectric actuators (to be used for the manual acquisition ofthe test parameters), we supply a collection of programmed command cards with test data for the main Siemens injectors.

*****The use of the adapter cable 87.31.006 is required

Cable for Denso common rail injectors, 4 poles on Toyota

Adapters kit for VTR110 on pump VP29/30 and VP44

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of EDC-V5 pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.

Adapter cable for Zexel Covec-F pumps application on MAZDA engines

Adapter cable for Zexel Covec-F pumps application on HYUNDAI (MITSUBISHI) engines ( L200 4D56 engines)

Adapter cable for Zexel Covec-F pumps application on ISUZU 4JG2 engines

Kit for the electric test in static conditions of the rpm sensor on VP pumps with OTA

Adapter plate for DENSO ECD V3/V4/V5 pumps for the advance reader

Steel Test Piping (ØE 6 ≠1,85 l=450mm) M12x1,5/14x1,5 common rail application. Covered with rubber for pumps VR

Steel Test Piping (ØE 6 ≠1,85 l=600mm) M14x1,5/14x1,5 common rail application. Covered with rubber

Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VE pumps with inductive and resistive actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

The kit includes:
- programming smartcard that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. length)
- adapter cable 81.02.434 (similar to Bosch 0986612434). Additional cables are available, under request
- Illustrated step-by-step instructions manual
- Test data to calibrate the pumps that can be connected to the adapter cable 81.02.434

Training for the use of the ERT45R simulator with the programming kit for testing the Bosch CP1/CP3/CP4 common rail pumps.

Service features:
- The training course will take place in Italy at the DETEQ site
- Duration of 1 day
- Maximum for 2 participants
- It is taught in English
- Standard training is intended for participants who are already operators of diesel systems.
- Technical instructions on the technology of the components that are the object of the operation of the machine are excluded. This type of service can only be provided with DETEQ.
- At the end of the training a certificate of attendance will be issued

The course includes training provided by DETEQ technicians, for:
- Performance characteristics of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. Participants will first be instructed and followed by our technical staff for practical exercises.