InjectionPower Sadakat Programı, pompa ve enjektör onarımlarıyla ilgilenen ve mükemmelliğe 5000 Euro'nun üzerinde yatırım yapmayı planlayanlar için özel olarak tasarlanmış avantajlar platformudur.
STARTER, PREMIUM ve ELITE profilleri mevcuttur.
Üyelik her yıl otomatik olarak yenilenir.

> > >Aşağıda açıklandığı gibi her katmanın ayrıntılı özelliklerine ve avantajlarına bakın.

Modular system for testing the camshaftless pumps manufactured by Zexel, with sizes:
- PFR1K.., PFR2K.., PFR3K.. PFR4K..
- PFR3KD, PFR4KD
- PFR3MD, PFR4MD
The cambox can be applied on any test bench for the diesel fuel injection pumps.
This configuration is supplied in one wooden box and includes the following components:

- Universal Cambox (9562-M1) and spacer (9562-M4 and 9562-M5)
- 4 cyl camshafts (9564-A and 9564-E)
- Fixing plate for Zexel PFR .. 1K (9562-T)
- Fixing plate for Zexel PFR .. 2K (9891)
- Fixing plate for Zexel PFR .. 3K (9892)
- Fixing plate for Zexel PFR .. 4K (9893-D)
- Fixing plate for Zexel PFR .. 3KD/MD (9562-MD3)
- Fixing plate for Zexel PFR .. 4KD/MD (9562-MD4)
- Rods (9562-F and 9562-L) and fuel control connector (9562-G, 9562-I, 9562-R and 9562-LB )
- Cambox mounting flange (9478-BXS)
- Drive coupling (9576)

ERT45R Kontrol Ünitesi, elektronik olarak kontrol edilen dizel enjeksiyon pompaları için tasarlanmış, her türlü test tezgahıyla uyumlu, evrensel bir test sisteminin çekirdeğidir. Bu yenilikçi simülatör, kapsamlı araştırmalarla geliştirilerek akıllı kartlar (mikroçip kartları) aracılığıyla programlanabilen çok yönlü bir cihaz ortaya çıkarılmıştır. Bu özellik, modern operasyonel gereksinimlerle mükemmel bir şekilde uyumludur.
ERT45R, mevcut programlama kitleri arasından seçim yaparak kolayca genişletilebilen uzun vadeli bir yatırımdır; şu anda 21 seçenek mevcuttur. Her kit, bir programlama kartı (yazılım), adım adım çizimler içeren ayrıntılı bir kullanım kılavuzu, taban kabloları (2 metre uzunluğunda) ve belirli pompa konnektörleri için özel olarak tasarlanmış adaptör kabloları içerir. Basit bir kurulumla, işlevsellik için en az bir programlama kiti gereklidir ve bu da ERT45R'yi çalışma ortamlarında esneklik ve verimlilik sağlarken test yeteneklerini geliştirmek isteyen profesyoneller için olmazsa olmaz bir araç haline getirir.

High accuracy electronic tool to test and trig the electromagnetic actuator of Bosch CRI and CRIN injectors and automatically relief the ball lift for the 3rd stage repair.

The flange 8155-E warrants the centered clamping of the majority of cr pumps (Bosch CP1, CP3, CP4, Delphi, Denso, VDO), on any test bench.
The flange is equipped with 4 rings of reduction to suite the 50, 60, 68, 80 mm hub diameters, as well as CP1K pumps.
The flange requires 9680-A universal cradle or similar.

Specifications:
- external diameter: 6 mm
- internal diameter: 2 mm
- thickness: 2 mm
- length: 600 mm
- nuts: M14x1,5 mm - M12x1,5 mm
Similar to Bosch reference 1 680 750 014, Hartridge AHP117, Denso 95091-10260

Swivel vice for Common-rail pumps

Reinforced swivel base, for mounting / dismounting the injection pumps at the workbench.

Tool box for assembly, disassembly and timing of CAV DPC pumps (17 particulars).

Hand pump for calibrating and checking the operations of the diesel injectors
- precise adjustment of the injection pressure (adjust the opening pressure of the injection nozzle)
- control of the spray atomization (pattern and vibration characteristics)
- control tightness (leaks)
- equipped with bypass valve for the manometer.
Dial: 0 -> 400 bars.
Tank fitted with a filter
Supplied with 2 connection pipes: 14-14 and 14-12 mm

Dial gauge bracket for rod stroke. Thread 24x1,5 protusion 18 mm for PE…P pumps

Universal clamping bracket to hold several flanges allowing the centered clamping of flanged diesel injection pumps.
The 125 mm centering height and 20mm guide (Bosch standard) can be adapted to different requirements, by the proper adapting spacers.

The test bench DIT31 is a modular solution to test the common rail injectors (the additional TC38 triggering unit is required) as well as the conventional and 2 stage (double spring) diesel injectors.
The applied technology allows the test parameters to be determined reliably on each injection, with greater precision and resolution than using on average long test cycles to collect a measurable quantity of fuel.

Main features:
- Main tank 3 lt. with 15 micron filter
- Separated container for the collection of the contaminated liquid
- Large atomization chamber with smoke extraction and halogen lamp
- Pneumatic operated pump unit, the standard version is suitable up to 1400 BAR (compressed air 8-10 BAR is required). Special versions can be installed as optional to generate more pressure and flow.
- Pneumatic vice for the automatic clamping of the injector
- Digital manometer with the reading scale selection (BAR/PSI)
- Printer to generate the test report
- Program for conventional injectors: (1) measurement of the NOP (nozzle opening pressure) and calculation of the back-leakage time.
- Program for Double-spring injectors: (2) measurement of the NOP1 (1st stage) and NOP2 (2nd stage), calculation of the back-leakage time and determination of the K factor.
- 2 programs for common rail injectors: (3) identification of the return flow (leakage time), (4) of the opening delay, the injection time and the injected fuel quantity (dp).
- 24 months warranty. User's and servicing manual in English language.

Tests and ohmic measurements should be obtained with a multimeter, to be used in conjuction with OTA.
The measuring point are fixed, so that the operator has the hands free.
The combination of the electric contacts is obtained by easily rotating the two knobs, like a game.
Function similar to Bosch 0 986 611 929.

Tool box for disassembly and eassembly of PES…M BOSCH pumps and PES…RSF…Mercedes.
The set is supplied without the reamer 9333 because discontinued.

Similar to Bosch genuine ref. 0 986 611 249, KDEP 2919/1