Ir al contenido

ECOMMERCE


  1. Productos
  2. Libro de marbed
  3. Herramientas para bombas diesel (2.)

Herramientas para bombas diesel (2.)

EUR (ecommerce)
Ordenar por: Destacado

Herramientas para bombas diesel (2.)

Universal bracket
Pair of universal flat bracket to install both P and H pumps, simply by placing or removing the thickness of adaptation
Flexible pipe
Flexible High pressure line L=600 mm. - M12x1,5 - M12x1,5
Tappet holder for Bosch CP2 pumps. Similar to 0 986 612 858 Zexel 157931-9400
kit de medición
Kit para determinar si la válvula ZME se puede retener, en lugar de instalar una nueva, en bombas CP4.
Acoplamiento estriado para bombas CP3.4 (MAN) en cualquier banco de pruebas. Similar a 1 685 702 092
Splined coupling to drive CP3.4 (MAN) pumps on any test bench.
Similar to 1 685 702 092
Semiacoplamiento estriado para bombas CAV
Bussola 1/2 per Torx Femmina E8
Cacciavite per Torx Femmina E8
Bussola 1/2 per Torx 50
Torx bit
Similar to 0 986 613 145
Flexible pipe
Flexible pipe ( cr 2500BAR) to connect the high pressure delivery from the pump outlet to the rail. Nuts 14x15 / 14x1,5. Similar to 1 680 712 324
Arrancador para CP1
Extraction tool for the cap on the rod-type filter on common rail high-pressure pump CP1H with gear pump.
Similar to 0 986 613 165
Arrancador
Herramienta extractora para la tapa del filtro en las bombas de alta presión de riel común CP1H equipadas con bomba de engranajes.
Similar a Bosch 0 986 613 162.
Set fissaggio e trascinamento pompe CP2 (cono 30 + flangia fissaggio + flangia lubrificazione)
Centralina di lubrificazione per pompe HP0
Kit de control
This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.
By-pass kit
Conjunto de derivación de retorno en bombas CP2 / HP0
Kit de prueba
kit de prueba de presión de transferencia con manómetro de 16 BAR (manómetro no incluido)
Juego de herramientas para el control de aspiración del cebador, así como el control del sello de la válvula, en las bombas Denso HP0.
Barras de fijación
Pair of mounting bracket for the easy disassemble and reassemble of HP0 pumps. The bracket has to be installed on the swivel vice 9260.
Coppia di staffe per HP0