Product category

Swivel vice for Common-rail pumps

Reinforced swivel base, for mounting / dismounting the injection pumps at the workbench.

Bomba manual para calibrar e verificar as operações dos injetores de diesel
- ajuste preciso da pressão de injeção (ajuste a pressão de abertura do bico de injeção)
- controle da atomização por spray (características de padrão e vibração)
- aperto de controle (vazamentos)
- equipado com válvula de desvio para o manômetro.
Disque: 0 -> 400 barras.
Tanque equipado com filtro
Fornecido com 2 tubos de conexão: 14-14 e 14-12 mm

Bomba operada manualmente para testar os injetores de combustível diesel, tamanhos de bico: T, U, V, W e P, R, S, T também.
A versão padrão é fornecida com o manômetro 0-600 BAR. Em conformidade com o padrão ISO 8984. O testador pode ser concluído com o dispositivo de sucção de fumaça (opcional).
Elegível para aplicar no mesmo intervalo de 0 681 143 014 (EFEP 67 D) e mais.

Plastic reservoir with cover, for the manual operated injector tester 9375

Splined socket wrench for the low-pressure connections. Hole diam 12 mm ( BH 0 986 612 991 )

Hand pump for calibrating and checking the operations of
the diesel injectors
- precise adjustment of the injection pressure (adjust the
opening pressure of the injection nozzle)
- control of the spray atomization (pattern and vibration
characteristics)
- control tightness (leaks)
- equipped with bypass valve for the manometer.
Dial: 0 - 600 bars gliceroil
Tank fitted with a filter
Supplied with 2 connection pipes: 14-14 and 14-12 mm

17 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive

New strengthened bracked couple for PE(S)…P..P and P7800

Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors.
List of contents:
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 0.01 mm (5 pcs each thickness)

Interface a ser montada no flange 8130 e 9478-CR para fixação de bombas Delphi cr como R9042A040A ou R9042A014A e similares.

20 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive. Similar to Bosch 0 986 613 458.

Special tool for the disassembly and the aligned mounting of the nozzle and for preserving the pins from breaking during the rotation of the nozzle nut.
The tool is equipped with analogic gauge for the reference of the force applied on the injector body.
Similar to 0 986 610 130