Swivel vice for operative flanges of PES…A,VE,VA pumps etc.

Special interfaces are available as optional, for the following: Bosch VE, Delphi DPC, DPS, DP200, Denso VE.

Plate for BOSCH 1 cyl.pump with location clamp for determining the delivery start ratio, with rod guide

Cambox universal base to house camshaftless pumps up to 4 cylinders on the test bench.
The cambox must be configured correctly (mounting plate, thickness - if required -, camshaft, control lever connection, sliding rod), depending on the type of pump to be tested.

Insert external diameter 6,3 mm.with inside hole diam.2,8 mm.on Stanadyne pumps.

Sliding hammer with adapter to extract Bosch CRIN injectors on Iveco Eurocargo

Comparator bearing to survey the rod share with connections for BOSCH P, P7100,8500,MW BOSCH pumps

Dial gauge holder with a spill point pipe and an extended rod with returning action.
Application: delivery start measurement on A, B, BV and line BOSCH pumps. Threads: M12x1,5 and M14x1,5

Universal bracket with rocker arm and return spring, for holding the comparator during the measuring of the rack travel on inline pumps.

Comparator bearing to survey the rod share BOSCH M,RFS pumps 4 and 5 cylinder.
Similar to BH 1 688 130 130

25 mm conical coupling to drive diesel pumps on any test bench. Length 100, teeth 12 mm
The puller 9463 is recommended to unplug the shaft.

25 mm conical coupling to drive diesel pumps on any test bench. Length 58, teeth 12 mm
The coupling is equipped with internal nut for locking and pulling out the shaft.
Similar to Bh 1 686 430 026 - Bh1 686 430 030

20 mm conical coupling to drive diesel pumps on any test bench, lenght 58, teeth mm 12.
The coupling is equipped with internal nut for locking and pulling out the shaft (BH 1 686 430 024)

Helical conical spare miller diam.22mm Iveco - Fiat 170

Needle valve for ISO test injector type IV (0 681 443 014)

Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL Covec F1/F2 pumps with electric actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

TC38 - Injector triggering unit for common-rail injectors.
This unit has been developed as a module, to be used in two main applications:
- in conjunction with the DIT31 test bench, to test any common rail injector
- in conjunction with the ERT45R simulator, to make running the complete common rail system (pump+rail+injectors) on any test bench.
Main features:
- Triggering command for electromagnetic actuators (always provided)
- Triggering command for piezoelectric actuators (provided as optional, by the CRP extension)
- Ready to multiple injection technology (pre-injection, main injection, recovery injection)
- no manual adjustment is required, in fact all the parameters necessary to generate the appropriate pulse(s) are memorized in special smartcards (triggering cards)
- Basic triggering cards are provided to acquire the test parameters of any brand new injector. These figures can be used to compare the test results of injectors having the same part number.
- In addition to the basic triggering cards, specific triggering cards (complete with ready-to-use test data) are available for the some of Bosch, Delphi, and Denso injectors.
- when used with ERT45R simulator, the RPM input is available for the dynamic triggering till 4 injectors, automatically in specific way at different speeds. Multiples of additional 4 injectors can be added, as option.
- 24 months warranty. User's and servicing manual.

Training service for the use of the ERT45R Simulator with the kits for the test of DELPHI DPCN pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.