Skip to Content

ECOMMERCE


Инструменты для дизельных насосов (2.)

Modular cambox, Zexel PFR..K , Zexel PFR.. KD, Zexel PFR..MD configuration.
Modular system for testing the camshaftless pumps manufactured by Zexel, with sizes:
- PFR1K.., PFR2K.., PFR3K.. PFR4K..
- PFR3KD, PFR4KD
- PFR3MD, PFR4MD
The cambox can be applied on any test bench for the diesel fuel injection pumps.
This configuration is supplied in one wooden box and includes the following components:

- Universal Cambox (9562-M1) and spacer (9562-M4 and 9562-M5)
- 4 cyl camshafts (9564-A and 9564-E)
- Fixing plate for Zexel PFR .. 1K (9562-T)
- Fixing plate for Zexel PFR .. 2K (9891)
- Fixing plate for Zexel PFR .. 3K (9892)
- Fixing plate for Zexel PFR .. 4K (9893-D)
- Fixing plate for Zexel PFR .. 3KD/MD (9562-MD3)
- Fixing plate for Zexel PFR .. 4KD/MD (9562-MD4)
- Rods (9562-F and 9562-L) and fuel control connector (9562-G, 9562-I, 9562-R and 9562-LB )
- Cambox mounting flange (9478-BXS)
- Drive coupling (9576)
Универсальный центрирующий фланец для насосов Common Rail с 4 кольцами.
Фланец 8155-E гарантирует центрированный зажим большинства насосов CR (Bosch CP1, CP3, CP4, Delphi, Denso, VDO) на любом испытательном стенде.
Фланец оснащен 4 редукционными кольцами для установки на втулки диаметром 50, 60, 68, 80 мм, а также насосами CP1K.
Для фланца требуется универсальная люлька 9680-A или аналогичная.
Vice
Swivel vice for Common-rail pumps
Экстрактор для втулки клапана регулирования давления
Corresponding to Bosch reference 0 986 611 562 - KDEP 1027, Zexel 157829-4620
Приводная муфта для редуктора DPA
Интерфейс адаптера для привода насосов CAV DPA (оснащенных шлицевым валом с внутренней резьбой) с помощью конического шарнира 17 мм. Шлицевая вилка, коническая вилка.
CAV-DPC Tool box
Tool box for assembly, disassembly and timing of CAV DPC pumps (17 particulars).
Comparator holder M8x1 with pair of probes.
Similar to 0 986 611 754, KDEP 1085, 1 680 110 630.
Dial gauge bracket
Dial gauge bracket for rod stroke. Thread 24x1,5 protusion 18 mm for PE…P pumps
Cradle for Bosch test bench, center distance 125 - guide 20. Similar to 1 688 010 124
Universal clamping bracket to hold several flanges allowing the centered clamping of flanged diesel injection pumps.
The 125 mm centering height and 20mm guide (Bosch standard) can be adapted to different requirements, by the proper adapting spacers.
Tools box
Tool box for disassembly and eassembly of PES…M BOSCH pumps and PES…RSF…Mercedes.
The set is supplied without the reamer 9333 because discontinued.
Support
Support for Bosch pumps PFM1A90S... (0 414 396 ...)