235 Tools for Delphi cr pumps

The flange 8155-E warrants the centered clamping of the majority of cr pumps (Bosch CP1, CP3, CP4, Delphi, Denso, VDO), on any test bench.
The flange is equipped with 4 rings of reduction to suite the 50, 60, 68, 80 mm hub diameters, as well as CP1K pumps.
The flange requires 9680-A universal cradle or similar.

Swivel vice for Common-rail pumps

Interface to be assembled on the flange 8130 and 9478-CR for fixing Delphi cr pumps as R9042A040A or R9042A014A and similars.

Flexible High pressure line L=600 mm. - M12x1,5 - M12x1,5

This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.

Warrants the centered clamping of the pumps having 50 mm hub diameter, on any test bench. The flange requires 9680-A universal cradle or similar.

Dukungan melingkar harus dipasang pada alas berputar (ref. 8132 atau 9260).
Sistem ini terdiri dari penyangga cincin melingkar, di mana braket (dapat dilepas) dengan proyeksi yang dapat disesuaikan dipasang, yang memungkinkan untuk menekan tappet. Dudukan melingkar memegang flensa bundar yang dapat dipertukarkan, yang dapat berputar 360 derajat dan dapat dikunci di posisi apa pun.
Flensa internal memungkinkan untuk memperbaiki pompa CP1, CP3, CP4, HP1, HP3, HP4, Delphi dan VDO.
Mirip dengan 0 986 612 794

Sebagai opsi tambahan, flensa opsional berikut juga tersedia:
- 8131, untuk pompa CP3.4
- 9402, untuk pompa mekanis A, M, VE, DPC

9 mm Oldham drive coupling for CP3 (FIAT) ans Siemens pumps on any test bench.
Similar to 1 685 702 090