Modular system for testing the camshaftless pumps manufactured by Zexel, with sizes:
- PFR1K.., PFR2K.., PFR3K.. PFR4K..
- PFR3KD, PFR4KD
- PFR3MD, PFR4MD
The cambox can be applied on any test bench for the diesel fuel injection pumps.
This configuration is supplied in one wooden box and includes the following components:

- Universal Cambox (9562-M1) and spacer (9562-M4 and 9562-M5)
- 4 cyl camshafts (9564-A and 9564-E)
- Fixing plate for Zexel PFR .. 1K (9562-T)
- Fixing plate for Zexel PFR .. 2K (9891)
- Fixing plate for Zexel PFR .. 3K (9892)
- Fixing plate for Zexel PFR .. 4K (9893-D)
- Fixing plate for Zexel PFR .. 3KD/MD (9562-MD3)
- Fixing plate for Zexel PFR .. 4KD/MD (9562-MD4)
- Rods (9562-F and 9562-L) and fuel control connector (9562-G, 9562-I, 9562-R and 9562-LB )
- Cambox mounting flange (9478-BXS)
- Drive coupling (9576)

Swivel vice for Common-rail pumps

Reinforced swivel base, for mounting / dismounting the injection pumps at the workbench.

Universal clamping bracket to hold several flanges allowing the centered clamping of flanged diesel injection pumps.
The 125 mm centering height and 20mm guide (Bosch standard) can be adapted to different requirements, by the proper adapting spacers.

Adapter cable for Ford pumps BH VE (BH ref. 0 986 612 446)

Adapter cable for Bosch rotary pumps VE..L 585, VE..R 635 (Fiat, Alfa, Lancia, Chrysler), VE..L 715, VE..L 736 (Nissan) (BH ref. 0 986 612 442), fitted with test data

Электронный считыватель для цифрового измерения регулировки времени впрыска дизеля.
Предоставляется в комплекте с
  - основной кабель
  - силовой кабель
  - датчик предварительного считывания
  - адаптер для насосов CAV DPA-DPC-DPC / N
  - переходник для насосов Bosch VE
  - адаптер для насосов CAV DP200
  - адаптер для насосов CAV DPS

Adapter cable for BH pumps VE..L460, VE..L460-1, VE..L460-2, VE..R530, VE..R530-1 (Audi) - 0 986 612 440, fitted with test data

Adapter cable for BH pumps VE..R 510, VE..R510-1, VE..R 590, VE..R 600, VE..R 638, VE..R 640, VE..R 650, VE..L550, VE..L 650, VE..L 649 (Audi - Volkswagen - Volvo) - 0 986 612 439, fitted with test data

Аналогичен артикулу Bosch 0 986 612 430 - KDEP 1865/1.

Ring nut wrench to remove the coil of Cummins common rail injectors installed on Scania XPI

Ring nut wrench to remove the nut with the teeth of Cummins common rail injectors installed on Scania XPI

Disassembly key 14 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive

The ERT45R Programming Kit enhances the functionality of the ERT45R control unit, specifically for testing Caterpillar C6.6 and C4.4 common rail pumps.
By leveraging the available features, Diesel Fuel Injection Specialists are equipped to conduct a comprehensive range of tests with confidence, achieving both precision and reliability in evaluating the performance of this type of pumps.
The specialized software together with the cables are crucial for professionals aiming to deliver high-quality service in fuel injection system diagnostics, thereby improving overall operational efficiency.

Set of tools for the installation of the test bench for industrial pumps: C/rail DENSO HP0 NE SENSOR flanged pump (094000-0342) and BOSCH C/rail CP2 pumps.
Universal Test Bench crandle
Sensor holder
Coupling with reference notch cone 30
Universal mounting flange complete with O-ring

This service is a comprehensive opportunity aimed at enhancing the technical skills of diesel injection Specialists.
This one-day course, spanning 8 working hours, will be conducted in English at the DETEQ headquarters in Italy, accommodating a maximum of 2 participants.
Throughout the course, participants will engage with experienced DETEQ technicians who will cover essential topics including the performance features of the products, installation challenges, proper usage methods, and maintenance practices. The hands-on practicality of this training is crucial; participants will receive step-by-step guidance from our technical personnel during practical exercises. At the end of the session, each attendee will be awarded a certificate, confirming their successful participation and knowledge gained during the training. This initiative not only improves operational competency but also empowers technicians to maximize the efficiency and reliability of their diesel diagnostic systems.

Sensor for the test bench shaft for application Caterpillar C6.6

The mounting flange and drive coupling have been meticulously designed to support external lubrication effectively, Furthermore, the coupling is equipped with a reference, significantly simplifying the timing process of the pump once testing concludes. This specialized approach not only enhances the reliability of performances and accuracy of diagnostics but also underscores the commitment to excellence toward the fuel injection system performance.

Training service for the use of the ERT45R Simulator with the kits for the test of Common rail BOSCH CP2 pumps .This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.