Skip to Content

ECOMMERCE


  1. Products
  2. Highlight
  3. Customer Favorites

Customer Favorites

EUR (ecommerce)
Sort By: Featured

Customer Favorites

Modular cambox, Zexel PFR..K , Zexel PFR.. KD, Zexel PFR..MD configuration.
Modular system for testing the camshaftless pumps manufactured by Zexel, with sizes:
- PFR1K.., PFR2K.., PFR3K.. PFR4K..
- PFR3KD, PFR4KD
- PFR3MD, PFR4MD
The cambox can be applied on any test bench for the diesel fuel injection pumps.
This configuration is supplied in one wooden box and includes the following components:

- Universal Cambox (9562-M1) and spacer (9562-M4 and 9562-M5)
- 4 cyl camshafts (9564-A and 9564-E)
- Fixing plate for Zexel PFR .. 1K (9562-T)
- Fixing plate for Zexel PFR .. 2K (9891)
- Fixing plate for Zexel PFR .. 3K (9892)
- Fixing plate for Zexel PFR .. 4K (9893-D)
- Fixing plate for Zexel PFR .. 3KD/MD (9562-MD3)
- Fixing plate for Zexel PFR .. 4KD/MD (9562-MD4)
- Rods (9562-F and 9562-L) and fuel control connector (9562-G, 9562-I, 9562-R and 9562-LB )
- Cambox mounting flange (9478-BXS)
- Drive coupling (9576)
ERT45R control unit
The ERT45R Control Unit is the core of a universal testing system designed for electronically controlled diesel injection pumps, compatible with any test bench. This innovative simulator has been developed through extensive research, resulting in a versatile device that is programmable via smartcards (microchip cards). This feature aligns perfectly with modern operational requirements.
The ERT45R is a long-term investment, allowing for easy expansion through a selection of available programming kits—21 options are currently available. Each kit includes a programming card (software), a detailed instruction manual with step-by-step illustrations, base cables (2 meters in length), and adapter cables tailored for specific pump connectors. With a straightforward setup, at least one programming kit is necessary for functionality, making the ERT45R an essential tool for professionals seeking to enhance their testing capabilities while ensuring flexibility and efficiency in their work environment.
Ball lift relief tool
High accuracy electronic tool to test and trig the electromagnetic actuator of Bosch CRI and CRIN injectors and automatically relief the ball lift for the 3rd stage repair.
The flange 9478-CP4 warrants the centered clamping of the CP4 pumps (Audi and Bmw applications), on any test bench. The flange requires 9680-A universal cradle or similar.
Cradle for Bosch test bench, center distance 125 - guide 20. Similar to 1 688 010 124
Universal clamping bracket to hold several flanges allowing the centered clamping of flanged diesel injection pumps.
The 125 mm centering height and 20mm guide (Bosch standard) can be adapted to different requirements, by the proper adapting spacers.
Sealing pipe for the diesel injection service with M12x1.5 / M14x1.5 female coupling (on side of quick connection and immediate release). Female M14x1.5 mm coupling (on fixed side) and removable male fitting.
OTA, Interface to make easier, faster and secure the diagnostic of the electric circuits of actuators and sensors applied on the diesel fuel injection pumps.
Tests and ohmic measurements should be obtained with a multimeter, to be used in conjuction with OTA.
The measuring point are fixed, so that the operator has the hands free.
The combination of the electric contacts is obtained by easily rotating the two knobs, like a game.
Function similar to Bosch 0 986 611 929.
Clamp stand with short shaft (380 mm long)
Similar to Bosch genuine ref. 0 986 611 249, KDEP 2919/1
ERT45R Programming Kit for Caterpillar C6.6 and C4.4 Common Rail Pumps
The ERT45R Programming Kit enhances the functionality of the ERT45R control unit, specifically for testing Caterpillar C6.6 and C4.4 common rail pumps.
By leveraging the available features, Diesel Fuel Injection Specialists are equipped to conduct a comprehensive range of tests with confidence, achieving both precision and reliability in evaluating the performance of this type of pumps.
The specialized software together with the cables are crucial for professionals aiming to deliver high-quality service in fuel injection system diagnostics, thereby improving overall operational efficiency.
AS25 electronic sensor to measure the travel of the timing-device piston on diesel pumps.
The kit includes the mounting adapters for the following pumps: Bosch VE, Zexel VE, Delphi DPC, DPC, DP200, DPS.
New bracket for pumps PFM1P100
New version of the b racket 9562-S. This revised design is suitable for the PFM1P100 pumps and the 0 141 401 106 as well.
Flexible pipe
Flexible High pressure line L=600 mm. - M12x1,5 - M16x1,5
Flexible pipe
Flexible High pressure line L=600 mm. - M12x1,5 - M12x1,5
Flexible pipe
Flexible High pressure line L=600 mm. - M12x1,5 - M14x1,5
Bundle of press machine and Forming Kits for the steel pipe ends, in both common-rail and conventional injection
This all-inclusive set combines the power of our 20-ton hand-operated 9376-D Press with three versatile forming kits, providing you with the ultimate solution for your pipe repair needs.
Whether you're dealing with traditional or common rail injection pipes, this bundle ensures you have the right tools at your disposal.
Weight: 42kg approx
Dimensions: cm 40x30x56h
Metallic manual pump to perform the following tests: - diesel pressure up to + 1.5 bar on turbocharger, LDA flow control valve, turbines, etc. - vacuum -1000 mbar on petrol turbocharger, valve filters, membrane for diesel pump regulator, etc.
Conventional tappet holder, on P type in-line pumps. Similar to 0 986 611 613, KDEP 1041.
Clamp
Clamp with two rods (spare part)
Tappet holder for PE(S)..A.. pumps. Similar to Bosch 0 986 611 227 - KDEP 2912.
Similar to the reference Bosch 0 986 611 227, Bosch 1 682 027 001, KDEP 2912.
Needles to clean the diesel nozzles
Set of 9 pentagonal reamers to remove dirt and oxide from diesel nozzle holes.
3 pieces by 3 different dimensions: 0.05 // 0.07 // 0.10 mm