ECOMMERCE

가장 밝은 부분

Product highlighting

In a huge range of products, highlighting just some of them carries a significant responsibility. Nevertheless, the subcategories listed on the left offer diverse perspectives, aiming to inspire and enhance the search process.

가장 밝은 부분

Modular cambox, Zexel PFR..K , Zexel PFR.. KD, Zexel PFR..MD configuration.

Modular system for testing the camshaftless pumps manufactured by Zexel, with sizes:
- PFR1K.., PFR2K.., PFR3K.. PFR4K..
- PFR3KD, PFR4KD
- PFR3MD, PFR4MD
The cambox can be applied on any test bench for the diesel fuel injection pumps.
This configuration is supplied in one wooden box and includes the following components:

- Universal Cambox (9562-M1) and spacer (9562-M4 and 9562-M5)
- 4 cyl camshafts (9564-A and 9564-E)
- Fixing plate for Zexel PFR .. 1K (9562-T)
- Fixing plate for Zexel PFR .. 2K (9891)
- Fixing plate for Zexel PFR .. 3K (9892)
- Fixing plate for Zexel PFR .. 4K (9893-D)
- Fixing plate for Zexel PFR .. 3KD/MD (9562-MD3)
- Fixing plate for Zexel PFR .. 4KD/MD (9562-MD4)
- Rods (9562-F and 9562-L) and fuel control connector (9562-G, 9562-I, 9562-R and 9562-LB )
- Cambox mounting flange (9478-BXS)
- Drive coupling (9576)

ERT45R 제어 장치

ERT45R 제어 장치는 모든 테스트 벤치와 호환되는 전자 제어 디젤 분사 펌프용으로 설계된 범용 테스트 시스템의 핵심입니다. 이 혁신적인 시뮬레이터는 광범위한 연구를 통해 개발되었으며, 스마트카드(마이크로칩 카드)를 통해 프로그래밍할 수 있는 다재다능한 장치가 탄생했습니다. 이 기능은 최신 운영 요구 사항과 완벽하게 일치합니다.
ERT45R은 장기 투자로, 현재 21개의 옵션을 제공하는 다양한 프로그래밍 키트를 통해 쉽게 확장할 수 있습니다. 각 키트에는 프로그래밍 카드(소프트웨어), 단계별 그림이 있는 자세한 사용 설명서, 기본 케이블(길이 2m) 및 특정 펌프 커넥터에 맞게 조정된 어댑터 케이블이 포함되어 있습니다. 간단한 설정으로 기능을 위해 최소한 하나의 프로그래밍 키트가 필요하므로 ERT45R은 작업 환경에서 유연성과 효율성을 보장하면서 테스트 기능을 향상시키려는 전문가에게 필수적인 도구입니다.

DIT31 - Test bench for diesel injectors.

The test bench DIT31 is a modular solution to test the common rail injectors (the additional TC38 triggering unit is required) as well as the conventional and 2 stage (double spring) diesel injectors.
The applied technology allows the test parameters to be determined reliably on each injection, with greater precision and resolution than using on average long test cycles to collect a measurable quantity of fuel.

Main features:
- Main tank 3 lt. with 15 micron filter
- Separated container for the collection of the contaminated liquid
- Large atomization chamber with smoke extraction and halogen lamp
- Pneumatic operated pump unit, the standard version is suitable up to 1400 BAR (compressed air 8-10 BAR is required). Special versions can be installed as optional to generate more pressure and flow.
- Pneumatic vice for the automatic clamping of the injector
- Digital manometer with the reading scale selection (BAR/PSI)
- Printer to generate the test report
- Program for conventional injectors: (1) measurement of the NOP (nozzle opening pressure) and calculation of the back-leakage time.
- Program for Double-spring injectors: (2) measurement of the NOP1 (1st stage) and NOP2 (2nd stage), calculation of the back-leakage time and determination of the K factor.
- 2 programs for common rail injectors: (3) identification of the return flow (leakage time), (4) of the opening delay, the injection time and the injected fuel quantity (dp).
- 24 months warranty. User's and servicing manual in English language.